常用DSLAM命令

阿卡7302： 查看速率模板配置 isadmin># info configure xdsl service-profile 将端口添加到模板 isadmin># configure xdsl line 1/1/11/27 service-profile 6 查看单个用户所在的模板 sadmin>configure# info configure xdsl line 1/1/11/27 查看相应的profile配置 isadmin>configure# info configure xdsl line（ service-profile 、spectrum-profile） 查看用户的速率 isadmin># show xdsl operational-data line 1/1/11/26 查看端口对应的cvlan isadmin># show bridge port 1/1/11/27:8:35 查看7302上联口 isadmin># show interface shub port 配置上联口 isadmin># configure interface shub port 查看端口是否同步 isadmin># show interface port xdsl-line 1/1/11/26 保存配置： isadmin>#admin software-mngt shub database save 查看ip地址及路由： isadmin>info configure system management 查看网关： isadmin>info configure ip shub vrf 0 查看上连口mac地址： isadmin>#show vlan shub-fdb 查看端口vlan配置： isadmin># info config bridge port 1/1/1/1:8:35 查看vlan透传方式： isadmin>#info config vlan shub id 101 配置端口vlan： isadmin>#info config bridge port 1/1/1/1:8:35

单板卡重启： isadmin>#admin equipment slot 1/1/7 reboot with-selftest 整框重启： isadmin》equipment reboot-isam with-self-test 退出命令 ： isadmin># logout 查看端口流量： isadmin>show xdsl xdsl-int 1/1/1/4/12

打开端口： isadmin>configure xdsl line 1/1/1/4 admin-up 闭掉端口： isadmin>configure xdsl line 1/1/1/4 no admin-up 批量打开端口： isadmin>configure xdsl line 1/1/4/[1…48] admin-up 查看整套设备用户上线数和MAC isadmin>show>vlan# bridge-port-fdb

查看单个用户的vlan和mac isadmin> show vlan bridge-port-fdb 1/1/8/25:8:35 查看单个用户的状态和流量 isadmin> show interface port atm-if:1/1/8/40 detail 查看单个用户的是否上线 isadmin >show vlan shub-fdb 332(用户VLAN号) 华为5600：

查询模板 DONGXIN_MA5600(config) display adsl line-porfine 自建模板： DONGXIN_MA5600(config) adsl line-profine

显示上联接口信息 DONGXIN_MA5600(config) display interface vlanif 显示单板卡信息： DONGXIN_MA5600(config) display version 0/1

删除命令： DONGXIN_MA5600_D(config)undo terminal user name 修改主机名： DONGXIN_MA5600_D#sysname sz MA5600 进入中文模式： DONGXIN_MA5600_D#switch language mode 查看板卡状态： DONGXIN_MA5600_D#display board 0 查看端口协商速率 DONGXIN_MA5600_D#display line operation port/slot 0/1/63 查看端口lock和速率配置 DONGXIN_MA5600_D#display adsl port state 0/1/63 查看profile配置 DONGXIN_MA5600_D#display adsl line-profile 8 查看端口是否同步 DONGXIN_MA5600_D#display service-port port/board

查看端口对应的PVLAN DONGXIN_MA5600_D#display pvc 0/1/63 可以整块查看 查看端口对应的mac DONGXIN_MA5600_D#display mac-address adsl 0/1/63

对单个adsl端口进行配置，先进某块单板再进行，激活activat ，去激活deactivate，后面加profile参数。

查看上联口：DONGXIN_MA5600_D(config)#interface scu 0/7 DONGXIN_MA5600_D(config-if-scu-0/7)#display port state all 上联口更改（2口是上联口）：[vlan-config] vlan 20 mux

vlan 101 to 996 mux vlan 3600 smart port vlan 3600 0/7 0 port vlan 20 0/7 2

port vlan 101 to 996 0/7 2 port vlan 3600 0/7 2 华为5100：

Display 改成show 对端口的操作均在板卡模式下进行。 查看协商速率： dongxin_ma5100_1(config-ADSL-0/0)#show line operation 2 查看profile配置 dongxin_ma5100_1(config)#show adsl line-profile 3

查看速率配置lock状态： dongxin_ma5100_1#show running-config slot 0/0 按槽位看 上联口更改：config t ； int lan 0/13 ; show statistics port all 重启板卡： board reset ……

港湾设备：

港湾端口ADSL改速率：con po 10:1 adsl downrate max 32 港湾端口VDSL改速率：con po 9:20 vdsl downrate

isadmin># show interface port bridge-port:1/1/4/12:8:35

================================================================================ port table

================================================================================

port admin-status opr-status -------------------------------------------------------------------------------- bridge-port:1/1/4/12:8:35 not-applicable down -------------------------------------------------------------------------------- port count : 1

================================================================================

isadmin># info configure vlan id 148 configure vlan

#-------------------------------------------------------------------------------

echo \"vlan\"

#------------------------------------------------------------------------------- id 148 mode cross-connect exit

#------------------------------------------------------------------------------- isadmin># info configure vlan id 101 configure vlan

#------------------------------------------------------------------------------- echo \"vlan\"

#------------------------------------------------------------------------------- id 101 mode cross-connect exit

#------------------------------------------------------------------------------- isadmin># info configure bridge port 1/1/4/12:8:35 configure bridge

#------------------------------------------------------------------------------- echo \"bridge\"

#------------------------------------------------------------------------------- port 1/1/4/12:8:35 max-unicast-mac 4 vlan-id 112 untagged exit pvid 112 exit

#------------------------------------------------------------------------------- isadmin># info configure bridge port 1/1/4/12:8:46 configure bridge

#------------------------------------------------------------------------------- echo \"bridge\"

#------------------------------------------------------------------------------- port 1/1/4/12:8:46 max-unicast-mac 4 vlan-id 3600 untagged exit

pvid 3600 exit

#------------------------------------------------------------------------------- isadmin># configure bridge port 1/1/4/48:8:35

isadmin>configure>bridge>port>1/1/4/48:8:35# info configure bridge

#------------------------------------------------------------------------------- echo \"bridge\"

#------------------------------------------------------------------------------- port 1/1/4/48:8:35 max-unicast-mac 4 vlan-id 148 untagged exit

pvid 148 exit

#------------------------------------------------------------------------------- isadmin>configure>bridge>port>1/1/4/48:8:35# no pvid

isadmin>configure>bridge>port>1/1/4/48:8:35# no vlan-id 148 isadmin>configure>bridge>port>1/1/4/48:8:35# info configure bridge

#------------------------------------------------------------------------------- echo \"bridge\"

#------------------------------------------------------------------------------- port 1/1/4/48:8:35 max-unicast-mac 4 pvid stacked:0:4097 exit

#------------------------------------------------------------------------------- isadmin>configure>bridge>port>1/1/4/48:8:35# vlan-id 148

isadmin>configure>bridge>port>1/1/4/48:8:35>vlan-id>148$ exit isadmin>configure>bridge>port>1/1/4/48:8:35# pvid 148 isadmin>configure>bridge>port>1/1/4/48:8:35# info configure bridge

#------------------------------------------------------------------------------- echo \"bridge\"

#------------------------------------------------------------------------------- port 1/1/4/48:8:35 max-unicast-mac 4 vlan-id 148 untagged exit

pvid 148 exit

#------------------------------------------------------------------------------- isadmin>configure>bridge>port>1/1/4/48:8:35# exit all isadmin># configure vlan shub id 101

isadmin>configure>vlan>shub>id>101# exit all isadmin># info configure vlan shub id 101 configure vlan shub

#------------------------------------------------------------------------------- echo \"vlan\"

#------------------------------------------------------------------------------- id 101 mode cross-connect egress-port lt:1/1/4 exit

egress-port network:4 exit exit

#------------------------------------------------------------------------------- isadmin># info configure vlan shub id 148 configure vlan shub

#------------------------------------------------------------------------------- echo \"vlan\"

#------------------------------------------------------------------------------- id 148 mode cross-connect egress-port lt:1/1/4 exit

egress-port network:4 exit exit

#------------------------------------------------------------------------------- isadmin># configure vlan shub id 149 egress-port network:1

Error : field _fsDot1qFutureVlanSetMaskPortList : the value is semantically not correct

isadmin>#