P6KE9.1CA资料

P6KE6.8(C)A - P6KE440(C)AP6KE6.8(C)A - P6KE440(C)AFeatures•••••Glass passivated junction.600W Peak Pulse Power capability at1.0 ms.Excellent clamping capability.Low incremental surge resistance.Fast response time; typically lessthan 1.0 ps from 0 volts to BV forunidirectional and 5.0 ns forbidirectional.Typical IR less than 1.0 µA above 10V.1.0 min(25.4)Dimensions ininches (mm)0.300(7.62)0.230(5.84)DO-15COLOR BAND DENOTES CATHODEEXCEPT BIPOLAR0.140(3.56)0.104(2.)0.034(0.86)0.028(0.71)•DEVICES FOR BIPOLAR APPLICATIONS- Bidirectional types use CA suffix.- Electrical Characteristics apply in both directions.600 Watt Transient Voltage SuppressorsAbsolute Maximum Ratings* T = 25°C unless otherwise notedASymbolPPPMIPPMPDif(surge)TstgTJPeak Pulse CurrentParameterPeak Pulse Power Dissipation at TA=25°C, TP=1msSteady State Power Dissipation.375 \" lead length @ TA = 75°CPeak Forward Surge Currentsuperimposed on rated load (JEDEC method) (Note 1)Storage Temperature RangeOperating Junction TemperatureValueminimum 600see table5.0UnitsWAW100-65 to +175-65 to +175A°C°C*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.Note 1: Measured on 8.3 ms single half-sine wave; Duty cycle = 4 pulses per minute maximum.1998 Fairchild Semiconductor Corporation

P6KE6.8(C)A - P6KE440(C)A, Rev. A

元器件交易网www.cecb2b.com

P6KE6.8(C)A - P6KE440(C)ATransient Voltage Supressors(continued)Electrical Characteristics T = 25°C unless otherwise notedAUni-directionalBi-directional (C)DeviceReverseStand-off VoltageVRWM (V)Breakdown Voltage VBR (V) min max TestCurrent IT(mA)Max ClampingVoltage @IPPM VC(V)Max Peak Pulse Surge Current IPPM (A) Max ReverseLeakage VRWM IR (uA)*P6KE6.8(C)AP6KE7.5(C)AP6KE8.2(C)AP6KE9.1(C)AP6KE10(C)AP6KE11(C)AP6KE12(C)AP6KE13(C)AP6KE15(C)AP6KE16(C)AP6KE18(C)AP6KE20(C)AP6KE22(C)AP6KE24(C)AP6KE27(C)AP6KE30(C)AP6KE33(C)AP6KE36(C)AP6KE39(C)AP6KE43(C)AP6KE47(C)AP6KE51(C)AP6KE56(C)AP6KE62(C)AP6KE68(C)AP6KE75(C)AP6KE82(C)AP6KE91(C)AP6KE100(C)AP6KE110(C)AP6KE120(C)AP6KE130(C)AP6KE150(C)AP6KE160(C)AP6KE170(C)AP6KE180(C)AP6KE200(C)AP6KE220(C)AP6KE250(C)AP6KE300(C)AP6KE350(C)AP6KE400(C)AP6KE440(C)A5.806.407.027.788.559.410.211.112.813.615.317.118.820.523.125.628.230.833.336.840.243.7.853.058.1.170.177.885.594.0102.0111.0128.0136.0145.01.0171.0185.0214.0256.0300.0342.0376.0 6.45 7.14 7.13 7.88 7.79 8.61 8.65 9.55 9.50 10.5 10.5 11.6 11.4 12.6 12.4 13.7 14.3 15.8 15.2 16.8 17.1 18.9 19.0 21.0 20.9 23.1 22.8 25.2 25.7 28.4 28.5 31.5 31.4 34.7 34.2 37.8 37.1 41.0 40.9 45.2 44.7 49.4 48.5 53.6 53.2 58.8 58.9 65.1 .6 71.4 71.3 78.8 77.9 86.1 86.5 95.5 95.0 105.0105.0 116.0114.0 126.0124.0 137.0143.0 158.0152.0 168.0162.0 179.0171.0 1.0190.0 210.0209.0 231.0237.0 263.0285.0 315.0332.0 368.0380.0 420.0418.0 462.01011111111111111111111111111111111111111111110.511.312.113.414.515.616.718.221.222.525.227.730.633.237.1.445.749.953.959.3.870.177.085.092.0103.0113.0125.0137.0152.0165.0179.0207.0219.0234.0246.0274.0328.0344.0414.0482.08.0602.057.153.150.045.041.038.036.033.028.027.024.022.020.018.116.014.513.212.011.210.19.38.67.87.16.55.85.34.84.44.03.63.42.92.72.62.42.21.91.81.51.31.11.01000500200501055555555555555555555555555555555555555* For bidirectional parts with VRWM<10V, the IR max limit is doubled.P6KE6.8(C)A - P6KE440(C)A, Rev. A

元器件交易网www.cecb2b.com

P6KE6.8(C)A - P6KE440(C)ATransient Voltage Supressors(continued)Typical CharacteristicsPeak Pulse Power Rating Curve100100Pulse Derating CurvePULSE POWER (kW)10PULSE POWER (%) T = 25 C ºA 75501250.10.000100.0010.010.1PULSE WIDTH (ms)1100255075100125150175ºAMBIENT TEMPERATURE ( C)200Pulse Waveform150PEAK PULSE CURRENT (%) T = 25 C ºA Pulse Width (td) is Defined tf = 10µsec as the Point Where the Peak Current Decays to 50% of Ipp Peak Value Ippm Half Value-Ipp 2 Junction Capacitance - Unidirectional600040002000CAPACITANCE (pF)10005002001005020 Measured at Stand-Off Voltage (V mw) T = 25 C ºA f = 1.0 MHz Visg = 50m Vp-p Measured at Zero Bias 10050 10/1000µsec Waveform as Defined by R.E.A. td 0 e-kt 012TIME (ms)3410151050REVERSE VOLTAGE (V)100200Steady State Power Derating Curve5Non-Repetitive Surge Current200FORWARD SURGE CURRENT (A) T = T maxA A 8.3ms Single Half Sine-Wave JEDEC MethodPOWER DISSIPATION (W)3.751002.5501.252000255075100125150ºLEAD TEMPERATURE ( C)17520010125102050NUMBER OF CYCLES AT 60Hz100P6KE6.8(C)A - P6KE440(C)A, Rev. A

元器件交易网www.cecb2b.com

DO-15 Package DimensionsDO-15 (FS PKG Code P2)1:1Scale 1:1 on letter size paperDimensions shown below are in:inches [millimeters]Part Weight per unit (gram): 0.41.0 min(25.4)0.300(7.62)0.230(5.84)∅0.140(3.56)0.104(2.)∅0.034(0.86)0.028(0.71)August 1999, Rev. A元器件交易网www.cecb2b.com

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and isnot intended to be an exhaustive list of all such trademarks.

ACEx™CoolFET™

CROSSVOLT™E2CMOSTMFACT™

FACT Quiet Series™FAST®FASTr™GTO™HiSeC™

DISCLAIMER

ISOPLANAR™MICROWIRE™POP™

PowerTrench™QS™

Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8TinyLogic™

UHC™VCX™

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHERNOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILDDOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTOR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENTRIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:

1. Life support devices or systems are devices or2. A critical component is any component of a life

support device or system whose failure to perform cansystems which, (a) are intended for surgical implant into

be reasonably expected to cause the failure of the lifethe body, or (b) support or sustain life, or (c) whose

support device or system, or to affect its safety orfailure to perform when properly used in accordance

with instructions for use provided in the labeling, can beeffectiveness.reasonably expected to result in significant injury to theuser.

PRODUCT STATUS DEFINITIONSDefinition of TermsDatasheet IdentificationAdvance Information

Product StatusFormative orIn Design

Definition

This datasheet contains the design specifications forproduct development. Specifications may change inany manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.

This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design.

PreliminaryFirst Production

No Identification NeededFull Production

ObsoleteNot In Production

This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.