双出口实例

R1

R1# show running-config Building configuration... . !

interface Ethernet0/0

ip address 100.100.100.1 255.255.255.0 ip policy route-map blah !

interface Serial1/0

ip address 10.10.10.1 255.255.255.0 !

interface Serial2/0

ip address 20.20.20.1 255.255.255.0 !

router ospf 1

!--- OSPF is not configured on Serial1/0.

log-adjacency-changes

network 20.20.20.0 0.0.0.255 area 0 network 100.100.100.0 0.0.0.255 area 0 !

ip classless no ip http server !

access-list 100 permit ip host 100.100.100.3 host 200.200.200.4 !

route-map blah permit 10 match ip address 100

set ip default next-hop 10.10.10.2 . . ! end R2

R2# show running-config Building configuration... . ! !

interface Ethernet0/0

ip address 200.200.200.2 255.255.255.0 ip policy route-map blah !

interface Serial1/0

ip address 10.10.10.2 255.255.255.0 fair-queue !

interface Serial2/0

ip address 20.20.20.2 255.255.255.0 !

router ospf 1

!--- OSPF is not configured on Serial1/0.

log-adjacency-changes

network 20.20.20.0 0.0.0.255 area 0 network 200.200.200.0 0.0.0.255 area 0 !

ip classless no ip http server !

access-list 100 permit ip host 200.200.200.4 host 100.100.100.3 !

route-map blah permit 10 match ip address 100

set ip default next-hop 10.10.10.1 ! end