PD02D104, 规格书,Datasheet 资料

DISPLAY PRODUCTS DIVISION

MODEL:PD02D104

128 x DOT MATRIX, GAS-PLASMA DISPLAY WITH CONTROLLER AND DC – DC CONVERTER

PLASMADOT™ full field dot matrix DC plasma display systems include driver electronics, on-board power supply, and a

dedicated microprocessor to perform display refresh and user interface operations. Bi-directional communication with the displaysystem is accomplished via an 8-bit ASCII interface in either parallel or RS-232C formats. Text inputs can be displayed in achoice of standard fonts and styles, or users can program custom characters to accommodate special requirements. Graphic inputcommands may also be used to display overlays to further enhance the displayed information.FEATURES

Display Format:Overall Size:

Overall Viewing Area:Pixel Size:Row Pitch:Column Pitch:LuminanceViewing Angle

ELECTRICAL SPECIFICATIONSAbsolute Maximum Ratings

Item

Converter Input VoltageOperating TemperatureStorage TemperatureLogic Input Voltage

rows x 128 columns8.00” x 5.00” x 1.50”5.10\" x 2.\". 020” x .020”. 040”. 040”50 fL130o

SymbolVpToprTstgVin

Value-0.3 to +35.00 to +60-40 to + 85-0.3 to +7.0

UnitV°C°CV

Recommended Operating Conditions (Measured with all pixels lit.)

ItemSymbolMinTypMax

Converter Input VoltageVp10.81226Converter Input PowerPin15Operating TemperatureTopr02560

Unit

VWatts°C

RS232 Interface Signals (Topr = +25°C)

Item Symbol

Input Threshold Voltage - LowVtlInput Threshold Voltage - HighVthOutput Voltage SwingVout

Min

0.8±5Typ1.21.5±8

Max2.4

UnitVVV

SPECIFICATIONS ARE FOR REFERENCE ONLY

9200-0115 Rev. A

_________________________________________________________________________________________________________

Phone: (714) 994-6500 14930 East Alondra Blvd., La Mirada, CA 90638-5752 Fax: (714) 994-3013

www.babcockinc.com

Page 1 of 4

芯天下--http://oneic.com/

BABCOCK Inc.

DISPLAY PRODUCTS DIVISION

MODEL:PD02D104

128 x DOT MATRIX, GAS-PLASMA DISPLAY WITH CONTROLLER AND DC – DC CONVERTER

Parallel Interface Signals (Topr = +25°C)

Item Symbol

Input High VoltageVihInput Low VoltageVilInput Leakage CurrentIinOutput High VoltageVohOutput Low VoltageVol

Min

3.5-0.5-103.5

MaxVcc0.8+100.5

UnitVVUAVV

SERIAL INTERFACE PORT

Data Bits:Parity:Start Bits:Stop Bits:Baud Rate:BAUD RATE

4800960019.2K38.4K

JUMPER 1

XX

JUMPER 2

XX

8None11

4800, 9600, 19.2K, 38.4K

‘X’ indicates an installed shunt.Environmental Specifications

Item

Operating TemperatureStorage Temperature

Humidity (Non-Condensing)Vibration (10-55 Hz, .06” P-P)Shock P (acceleration, 11 Msec)Altitude (Operating)

Altitude (Non-Operating)

Min0-400

Max+60+ 859533020,00070,000

Unit°C°C%GGft.ft.

SPECIFICATIONS ARE FOR REFERENCE ONLY

9200-0115 Rev. A

_________________________________________________________________________________________________________

Phone: (714) 994-6500 14930 East Alondra Blvd., La Mirada, CA 90638-5752 Fax: (714) 994-3013

www.babcockinc.com

Page 2 of 4

芯天下--http://oneic.com/

BABCOCK Inc.

DISPLAY PRODUCTS DIVISION

MODEL:PD02D104

128 x DOT MATRIX, GAS-PLASMA DISPLAY WITH CONTROLLER AND DC – DC CONVERTER

CUSTOMER INTERFACE

Parallel Communication Interface Connector J2

Mating Connector:AMP Part No. 746285-6 (or equivalent)

J2 Pin No.

1

35791113151719212325

DescriptionDATA 0DATA 1DATA 2DATA 3DATA 4DATA 5DATA 6DATA 7WR*SEL*RD*RESET*BLANK*

Computer Port

23456711716-15

J2 Pin No.

2468101214161820222426

DescriptionGNDGNDGNDGNDGNDTEST*GNDGNDGNDGNDGNDBUSYGND

Computer Port

18192021221423242512131110

* = Negative true logic

PARALLEL COMMUNICATIONS PORT CABLE CONNECTOR

All interface signals for the 8-bit I/O port are supplied to the display by a 26-pin ribbon cable header. It is recommended to use areceptacle with the center polarization.Power Supply Connector J3

Mating Connector:

J3 Pin No.

1234

Amp Part No. 1-480424-0Description+12 Volts Input

GNDGND

+5 Vdc @ 150 mAmps

Serial Communications Interface Connector J1

Mating Connector:Amp Part No. 747321-4 (or equivalent)

J1 Pin No.

23485

NameTxDRxDCTSDTRGND

Description

Transmit Data (Output) -Output sent by the display back to the host.

Receive Data (Input) -Data sent by the host to the display system.Clear to Send (Input) -Input indicates if the host is ready to accept data from The display system.

Data Terminal Ready (Output) -Output indicates to the host if the display system is Ready to accept data.Signal Ground -Logic return for all serial interface signals.

*Pins 1,6,7, and 9 are not connected.

SPECIFICATIONS ARE FOR REFERENCE ONLY

9200-0115 Rev. A

_________________________________________________________________________________________________________

Phone: (714) 994-6500 14930 East Alondra Blvd., La Mirada, CA 90638-5752 Fax: (714) 994-3013

www.babcockinc.com

Page 3 of 4

芯天下--http://oneic.com/

BABCOCK Inc.

DISPLAY PRODUCTS DIVISION

MODEL:PD02D104

128 x DOT MATRIX, GAS-PLASMA DISPLAY WITH CONTROLLER AND DC – DC CONVERTER

Outline and Mounting Dimensions:

SPECIFICATIONS ARE FOR REFERENCE ONLY

9200-0115 Rev. A

_________________________________________________________________________________________________________

Phone: (714) 994-6500 14930 East Alondra Blvd., La Mirada, CA 90638-5752 Fax: (714) 994-3013

www.babcockinc.com

Page 4 of 4

芯天下--http://oneic.com/