您好,欢迎来到六九路网。
搜索
您的当前位置:首页Lock On键位表

Lock On键位表

来源:六九路网
Key(按键) Esc Ctrl-Q Shift-Backspace Alt-Backspace Ctrl-S Ctrl-0 Shift-0 Alt-0 Ctrl-9 Shift-9 Ctrl-A Alt-A Shift-A S Alt-J Ctrl-Backspace Print Screen „ (quote) Ctrl-M Alt-M Shift-Return Down Arrow Up Arrow Left Arrow Action(功能) PROGRAM CONTROL(程序控制) End mission/track 退出任务/录相 Take control in the track 在播放录相时控制飞机 Track edit Replace mode (disable old editing commands) 编辑录相-覆盖模式(取消现存编辑命令) Track edit Insert mode (don‟t disable old editing commands) 编辑录相-插入模式(保留现存编辑命令) Toggle Sound On or Off 声音开关 Begin recording microphone sound in the track 在录相中开始话筒录音 End recording microphone sound in the track 在录相中结束话筒录音 Record On or Off the place of cursor in the track 在录相中打开/关闭鼠标光标 Begin recording subtitle in the track 在录相中开始记录字幕 End recording subtitle in the track 在录相中结束记录字幕 Accelerate simulation speed 加快游戏速度(快镜头) Decelerate simulation speed 减慢游戏速度(慢镜头) Reset normal simulation speed 恢复正常游戏速度 Toggle Pause/Resume/Launch model time at the mission start. 任务开始/暂停/继续 Jump into selected AI plane cockpit or leave current plane cockpit. 取得/放弃所选飞机控制权 Show frame rate 显示帧数 Upload screen shots to ScreenShots folder, numbering them with 0, 1, 2, … 抓屏 Show mission goals window during mission Show scores window during multiplayer mission 单人任务时显示任务目标窗口/联网任务时显示成绩窗口 Toggle chat window for communication with all gamers during multiplayer 联网任务时打开对话窗口――向所有玩家发送信息 Toggle chat window for communication with my side during multiplayer 联网任务时打开对话窗口――向己方玩家发送信息 Recover human plane in the multiplayer games. 重新获得飞机(复活) FLIGHT CONTROL(飞行控制) Nose up 机首上抬 Nose down 机首下压 Bank left Ver 1.02 1.02 1.02 Key(按键) Right Arrow Ctrl-. (Period) Ctrl-; (Semi-colon) Ctrl-, (Comma) Ctrl-/ (Slash) Ctrl-T Z X Ctrl-Z Ctrl-X A H J Shift-N Alt-V K U Alt-P Alt-S Alt-E Page Up Page Down Key Pad + (Plus) Key Pad - (Minus) Action(功能) 机身向左侧滚 Bank right 机身向右侧滚 Trim up 向上配平 Trim down 向下配平 Trim left 向左配平 Trim right 向右配平 Reset trimmers 取消配平 Rudder left (in flight), left turn (taxi) 左舵(空中),左转(地面) Rudder right (in flight), right turn (taxi) 右舵(空中),右转(地面) Trim left rudder 左舵配平 Trim right rudder 右舵配平 Toggle auto-pilot. If the autopilot is on then the plane tries to fly along the route in the NAV mode or to take the horizontal position in combat modes. 自动驾驶 Toggle altitude stabilization mode 打开/取消高度固定 Toggle auto-throttle 打开/取消速度固定 Reset Current Audible Warning 重置语音警报 Toggle immortality mode for own plane (doesn't work in network and in protected missions) 无敌模式(联网或加密任务中无效) Execute “Pugachev‟s Cobra” 解除仰角抑制(执行“眼镜蛇”机动) Setting your plane to the takeoff site on the carrier 在航母上进入起飞位置 Automatic spin recovery (press to recover from spin state) 退出螺旋失速(保持键) Speed retention toggle 速度保持模式 Easy landings toggle 简易降落模式 THROTTLE CONTROL(引擎控制) Engine Start - Increase Throttle in increments 发动引擎/快速增加推力 Decrease Throttle in increments - Engine Stop 关闭引擎/快速减小推力 Increase Throttle smoothly 缓慢增加推力 Decrease Throttle smoothly Ver 1.02 Key(按键) With Alt With Shift B Shift-B Ctrl-B Ctrl-E-E-E E F Shift-F Ctrl-F G Ctrl-G Ctrl-C P Ctrl-P Ctrl-R Alt-R W T R Ctrl-H L Ctrl-L Alt-L Action(功能) 缓慢减小推力 Left engine only ALT组合单纯控制左引擎 Right engine only SHIFT组合单纯控制右引擎 MECHANICAL SYSTEMS CONTROL(机械系统控制) Toggle airbrake 减速板开关 Airbrake out 打开减速板 Airbrake in 关闭减速板 Eject (Press E three times holding Ctrl down) 弹射跳伞 Toggle active jamming (requires ECM pods in loadout) 电子干扰开关 Toggle flaps up/down 襟翼收放开关 Flaps down to the landing position 襟翼全开 Flaps up 襟翼全收 Toggle landing gear up/down 起落架开关 Toggle arrestor hook down/up (Note: Su-33 only) 尾勾开关(仅限SU33) Canopy open/close 座舱盖开关 Release drogue chute 释放阻力伞 Toggle folding wings (Note: Su-33 only) 机翼折叠开关(仅限SU33) Dump fuel (in flight) or refuel (ground) (Note: Hold key) 空中释放燃油/地面加油(保持键) Jettison fuel tanks 抛弃副油箱 Wheel brakes (ground) (Note: Hold key) 机轮刹车(保持键) Toggle wingtip smoke 拉烟开关 Toggle refueling boom 受伸缩开关 HUD color selection 改变HUD颜色 Cockpit illumination 仪表照明开关 Toggle on-board lights 机身信号灯开关 Toggle gear light Near/Far/Off 起落架灯--近光/远光/关闭 Ver Key(按键) ~ (Tilde) 1 Alt-C 2 3 4 5 6 7 8 ~ (Tilde) TAB Ctrl-TAB Action(功能) NAVIGATION(导航模式) Select next waypoint or airfield 选择下一导航点或机场 Navigation (NAV) modes 导航模式 Reset flight clock 重置飞行时钟 COMBAT MODES(作战模式) Toggle to set Beyond Visual Range (BVR/DVB) mode 超视距空战模式 Select Close Air Combat – Vertical Scan (CAC/BVB – VS) mode 近距空战――垂直扫描模式 Select Close Air Combat – Bore (CAC/BVB – BORE/STR) mode 近距空战――孔径模式 Select Close Air Combat – Helmet-Mounted Target Designator (CAC/BVB – HMTD/SHLEM) mode 近距空战――头盔模式 Select Longitudinal Missile Aiming (LNGT/FIO) mode 径向瞄准模式 Select Air-to-ground (GND/ZEMLYA) mode 空对地模式 Select Grid (SETKA) mode 目视投弹模式 Cycle through targets (Cycle through targets on MFD in AWACS and Ground Attack Modes) 目标循环切换 Lock selected target or target point (turn on tracked target) 锁定所选目标或目标点(打开目标跟踪) Turn off tracked target 关闭目标跟踪 Change the RWR/SPO mode For US RWR three modes in cycle: all threats, lock threats, launch threats. For RF SPO two modes in cycle: all threats, lock threats. RWR/SPO(威胁告警)模式切换 WEAPONS (武器系统) Cycle through weapons selection 武器选择 Toggle cannon 机炮选择 Dispense chaff & flare (one chaff and two flares) 释放干扰弹(单发释放) Continuously dispense chaff & flares (until supply is exhausted) 释放干扰弹(连续释放) Dispense chaffs only 释放雷达干扰 Dispense flares only (in pair) 释放红外干扰 Fire weapon (for RF aircrafts) and fire gun (for US aircrafts) 发射武器(俄机),发射机炮(美机) Release weapon (for US aircrafts only) Ver 1.02 1.02 1.02 1.02 1.02 Shift-R D C Q Shift-Q Insert Delete Spacebar Enter Key(按键) Alt-W Ctrl-W Ctrl-V Shift-C V Shift-V Ctrl-Space Alt-Space Shift-Space I Shift-I Alt-I Action(功能) 发射武器(美机) Launch permission override (for RF aircrafts) 打开武器保险(俄机,可在未锁定目标时发射) Jettison weapons (in pairs) while airborne, reloads weapons while on the ground 成对抛弃武器(空中),重新装填武器(地面) Toggle salvo mode on or off 齐射模式开关 Change rate of fire for the gun of A-10 改变机炮射速(A10) Increase the ripple interval for A-10 增加投弹间距(A10) Decrease the ripple interval for A-10 减小投弹间距(A10) Change the ripple quantity for A-10 改变投弹数量(A10) Switch the master arm for A-10 选择首选武器(A10) Change the release mode for A-10 单个/成对投弹模式切换(A10) RADAR & ELECTRO-OPTICAL SYSTEMS (雷达光电系统) Toggle radar on/off 雷达开关 Easy radar mode toggle 简易雷达模式 Change radar mode RWS/TWS for F-15 radar RWS/TWS(目标跟踪)雷达模式切换(仅限于F-15) Toggle Electro-Optical System (EOS) on/off for Su-27/33 and MiG-29 Toggle laser target designator on/off for Su-25 Toggle CCRP bombing mode on/off for A-10 俄战斗机:打开/关闭光电扫描仪 俄攻击机:打开/关闭激光测距仪 美攻击机:打开/关闭CCRP投弹模式 Reset to center all sensor 所有扫描仪器归中 Multi-Functional Display (MFD) zoom out 扩大MFD显示范围 Multi-Functional Display (MFD) zoom in 减小MFD显示范围 Increase radar antenna azimuth limit for F-15 radar 增大F15雷达天线方位角 Decrease radar antenna azimuth limit for F-15 radar 减小F15雷达天线方位角 AUTO LOCK ON(自动锁定) Lock on to nearest enemy air target 锁定最近的敌空中目标 Lock on to enemy air target nearest the center of the player‟s view 锁定距视野中线最近的敌空中目标 Lock on to previous enemy air target 锁定前一个敌空中目标 Ver 1.02 1.02 O Ctrl-I - (Minus) + (Plus) Ctrl-+ Ctrl-- ScrollLock Alt-ScrollLock Shift-Insert Key(按键) Shift-NumLock Shift-ScrollLock Control-ScrollLock Shift-Delete Ctrl-NumLock Shift-; (Semicolon) Shift-, (Comma) Shift-. (Period) Shift-/ (Slash) -; (Semicolon) -, (Comma) -. (Period) -/ (Slash) Shift-; (Semicolon) Shift-, (Comma) Shift-. (Period) Shift-/ (Slash) \\ Shift-[ Action(功能) Lock on to next enemy air target 锁定下一个敌空中目标 Lock on to nearest enemy ground target 锁定最近的敌地面目标 Lock on to enemy ground target nearest the center of the player‟s view 锁定距视野中线最近的敌地面目标 Lock on to previous enemy ground target 锁定前一个敌地面目标 Lock on to next enemy ground target 锁定下一个敌地面目标 AIR COMBAT MODES(空战模式) Move radar/EOS scan zone UP 向上移动雷达/光电扫描区 Move radar/EOS scan zone LEFT 向左移动雷达/光电扫描区 Move radar/EOS scan zone DOWN 向下移动雷达/光电扫描区 Move radar/EOS scan zone RIGHT 向右移动雷达/光电扫描区 Move HUD target designator Box DOWN (BVR only) 扫描框下移 Move HUD target designator Box LEFT (BVR only) 扫描框左移 Move HUD target designator Box UP (BVR only) 扫描框上移 Move HUD target designator Box RIGHT (BVR only) 扫描框右移 GROUND MODE(空对地模式) Move radar/TV seeker scan zone UP 雷达/电视制导探头上移 Move radar/TV seeker scan zone LEFT 雷达/电视制导探头左移 Move radar/TV seeker scan zone DOWN 雷达/电视制导探头下移 Move radar/TV seeker scan zone RIGHT 雷达/电视制导探头右移 RADIO COMMANDS(无线电通讯) Communication menu 打开无线电呼叫对话框 Dispatch wingman on mission. When mission completion, join up (Complete mission and rejoin) 命令僚机执行任务,任务完成后归队 Dispatch wingman on mission. When mission completion, return to base (Complete mission and RTB) 命令僚机执行任务,任务完成后返航 Toggle tight formation or loose formation (Toggle formation) 命令机群组成密集/松散编队 Rejoin formation 命令僚机重返编队 Ver 1.02 1.02 1.02 1.02 Ctrl-[ Shift-] Alt+[ Key(按键) [ ] Alt-H Alt-T F1 Ctrl-F1 Alt-F1 F2 Shift-F2 F3 Ctrl-F3 F4 Ctrl-F4 Action(功能) Attack my target 命令僚机攻击长机目标 Cover my six o‟clock (Cover me) 命令僚机掩护长机六点 Radio request to AWACS for bearing and distance to the home airfield 呼叫预警机:请求机场方位、距离 Radio request to AWACS for bearing and distance to the tanker 呼叫预警机:请求加油机方位、距离 VIEW SELECTION(视角选择) Cockpit View 座舱视角 Natural Head Movement View 头部自然摆动视角 HUD Only View 纯HUD视角 External View – All Aircraft & Parachutist 外部视角 Aircraft labels toggle 打开/关闭飞机标签 Fly-By View 飞越视角 Fly-By Jump View (saving current camera position) 从其它视角切换到飞越视角(保留当前摄像机位置) Rear View 后视视角 Chase View 追尾视角 Air Combat View (Cycles through locked enemy planes around the current plane from nearest to farthest. Looks at the enemy plane from the current plane and shows enemy data in the info string. Refreshes locking at every switch.) 空战视角 Air to Ground Combat View (Cycles through locked enemy vehicles/ships around the current plane from nearest to farthest. Looks at the enemy vehicle/ship from the current plane and shows enemy data in the info string. Refreshes locking at every switch.) 空对地视角 Weapons View 武器视角 Chase Weapon View (“Weapon To Target” View) 武器追尾视角(导弹/对目标视角) Launched missiles labels toggle 打开/关闭所发射武器标签 Active Ground Objects View 活动的地面物体视角 Target View 目标视角 Ship View 舰船视角 Landing Signal Officer (LSO) View 航母着舰信号器视角 Ver 1.02 1.02 F5 Ctrl-F5 F6 Ctrl-F6 Shift-F6 F7 F8 F9 Alt-F9 Key(按键) Shift-F9 F10 Shift-F10 F11 Action(功能) Ships and ground units labels toggle 打开/关闭舰船及地面单元标签 Theater View 地图视角 Object labels toggle 打开/关闭物体标签 Tower & Terrain View 塔台及地表视角 Switches to Tower & Terrain View saving current view position (freezing camera position). When switching from Theater View (F10) the current F11 camera position comes from the F10 camera position, but it‟s altitude does not exceed 20km. 在当前视角中固定摄像机位置。可在地图中指定地点后用F11切换观看,但高度不得超过20000米 Ver Ctrl-F11 F12 Ctrl-F12 Shift-F12 Ctrl-Home Ctrl-End Ctrl-Delete Static Objects View 静态物体视角 Civilian transport 民用运输视角 Trains/cars toggle for Ctrl-F12 view 火车/汽车视角 Keypad Del Ctrl-Keypad Del Backspace Alt-Delete Alt-Insert Ctrl-PageUp Ctrl-PageDown Ctrl Key Pad +(plus) Alt-Key Pad * Alt-Key Pad / VIEW MODIFIERS(视角调整) Places external views to Friendly only 在外部视角中只显示友机 Places external views to Enemy only 在外部视角中只显示敌机 Places external views to All 在外部视角中显示所有飞机 Toggle Padlock View (Note: for F1, F2, F6, F7, F8, F9, Alt-F9 LSO View & F11 Tower View only) 切换目视锁定视角(只用于F1、F2、F6、F7、F8、F9、ALT-F9、F11等视角中) Toggle Terrain Point Padlock View (Note: for F2, F6, F7, F8, F9 Views only) 切换到地表目视视角(只用于F2、F6、F7、F8、F9等视角中) Toggle “From object/To object” camera direction mode (Note: for F2, F6, F7, F8, F9, F12 Views only). 切换“目标到目标”视角方向(只用于F2、F6、F7、F8、F9、F12等视角中) Exclude current object from the view switching 在视野中隐藏当前物体 Include all excluded objects to the view switching 显示当前视野中隐藏物体 Reverse objects switching direction 反序目标切换 Forward objects switching direction 正序目标切换 Switch to Weapons Release and Track View for F1 Cockpit, F2 External, F4 Chase, F7 Active Ground Targets, and F9 Ship Views. Switches to ANY weapon now, not to bombs&missiles only! 武器发射视角切换开关 Starts moving camera forward (F11Tower & Terrain View only) 开始向前移动摄像机(用于F11视角) Starts moving camera backward (F11Tower & Terrain View only) Key(按键) Key Pad 5 Shift-Key Pad 5 Y Alt-Y Alt-Backspace Shift-Backspace Shift-J Action(功能) 开始向后移动摄像机(用于F11视角) Stops moving camera (F11 Tower & Terrain View) 停止摄像机移动(用于F11视角) Returns to Tower & Terrain View starting point 返回塔台/地表视角起始点 External View Information Display Cycle Toggle 机外视角信息栏状态切换 Earth Coordinates Units Toggle (Degrees/Meters) 坐标位置 Insert video edit mode toggle (replace mode is on by default) 视频编辑-插入模式 Replace video edit mode toggle (default) 视频编辑-覆盖模式 External camera jiggle toggle 外部视角中摄像机抖动效果开关 Toggle local/object camera rotation mode for F2, F4, F6, F7, F8, F9 and F12 views. 在当前视角中切换为摄像机旋转模式(用于F2、F4、F6、F7、F8、F9、F12等视角) COCKPIT VIEW CONTROL(座舱视角控制) Move head down and left 视角向左下移动 Move head down 视角向下移动 Move head down and right 视角向右下移动 Move head left 视角向左移动 Centers camera 视角归中 Move head right 视角向右移动 Move head up and left 视角向左上移动 Move head up 视角向上移动 Move head up and right 视角向右上移动 Move head quickly 快速移动视角 Move head with pan steps around pan base 视角移动即时切换 Center head to pan base 视角移到正中 Move pan steps base 逐屏移动座舱视角 Center pan steps base 视角回到正中 Pan steps mode toggle (to return or not to return camera tacitly) 仪表视角步进模式切换 Enable/change target padlock view Ver Shift-Esc Key Pad 1 Key Pad 2 Key Pad 3 Key Pad 4 Key Pad 5 Key Pad 6 Key Pad 7 Key Pad 8 Key Pad 9 Shift – Key Pad 1-9 Ctrl – Key Pad 1-9 Ctrl – Key Pad 5 Alt – Key Pad 1-9 Alt – Key Pad 5 Alt – Z Key Pad Del Key(按键) Action(功能) Ver 1.02 激活/改变锁定目视目标 Disable padlock view Key Pad NumLock 取消目视锁定 All missile padlock toggle Shift-Key Pad Del 所有导弹目视锁定 Threat missile padlock toggle Alt-Key Pad Del 来袭导弹目视锁定 Move head to view right mirror M 右后视镜视角 Move head to view right mirror N 左后视镜视角 Zoom in (narrow view angle). With Shift – Zoom in to limit Key Pad * (Asterisk) 视角拉近(与SHIFT合用拉到最近) Zoom out (enlarge view angle). With Shift – Zoom out to limit Key Pad / (Divide) 视角推远(与SHIFT合用推到最远) Set default zoom (default view angle). Key Pad Enter 视角大小还原 Jump to cockpit panel snap view and back (Note: Hold down then release) Hold down Key Pad 0 and press Key Pad 1-9 to jump around different Key Pad 0 instruments with close-up view. 仪表盘视角切换(保持键) Cockpit panel snap view mode toggle. Don‟t hold down. Then press Key Pad 1-9 to jump around different instruments with close-up view. Press Ctrl - Key Ctrl - Key Pad 0 Pad 0 once more to return to normal mode. 仪表盘视角切换(非保持键) Save current camera position for the last cockpit snap view, corresponding to Key Pad 0 - 9. May be different for different planes! If the user runs the mission then all new custom camera snap positions will be saved in the Config/View/SnapViews.lua file. If the user records the track then all new custom camera snap positions will be saved in the track file and then will Alt - Key Pad 0 always be used for that track in future. Note: saving snap views feature is disabled by default. To enable it set parameter DisableSnapViewsSaving = false in the Config/View/Cockpit.lua file. You may always force using default snap views by parameter UseDefaultSnapViews = true. 保存当前座舱内视角位置 Fast cockpit mouse speed Ctrl – Right Shift 增快座舱内鼠标控制视线速度 Slow cockpit mouse speed Alt – Right Shift 减慢座舱内鼠标控制视线速度 Normal cockpit mouse speed Left Shift – Right Shift 鼠标控制速度还原 Fast cockpit keyboard speed Ctrl – Left Shift 增快座舱内键盘控制视线速度 Slow cockpit keyboard speed Alt – Left Shift 减慢座舱内键盘控制视线速度 Normal cockpit keyboard speed Right Shift – Left Shift 键盘控制速度还原 EXTERNAL VIEW CONTROL(扩展视角控制) Rotate viewpoint down and left Key Pad 1 向左下旋转视点 Rotate viewpoint down Key Pad 2 向下旋转视点 Key(按键) Key Pad 3 Key Pad 4 Key Pad 5 Ctrl-Key Pad 5 Key Pad 6 Key Pad 7 Key Pad 8 Key Pad 9 Key Pad * (Asterisk) Key Pad / (Slash) Ctrl-Key Pad * (Asterisk) Ctrl-Key Pad / (Divide) Ctrl-Key Pad Enter Shift-(all view keys) Ctrl-(Key Pad 1-9) File(文件) Ctrl-N Ctrl-O Alt-M Ctrl-S Ctrl-Shift-S Alt-X Edit(编辑) Del Ctrl-Shift-C Ctrl-Shift-D Action(功能) Rotate viewpoint down and right 向右下旋转视点 Rotate viewpoint left 向左旋转视点 Centers view (stops F11 viewpoint moving) 视点归中(在F11中停止视点移动) Returns to starting point (F11 Tower & Terrain View only) 返回起始位置(在F11中回到默认位置) Rotate viewpoint right 向右旋转视点 Rotate viewpoint up and left 向左上旋转视点 Rotate viewpoint up 向上旋转视点 Rotate viewpoint up and right 向右上旋转视点 Move viewpoint forward 向前移动视点 Move viewpoint back 向后移动视点 Zoom in (narrow view angle). 扩展视角拉近 Zoom out (enlarge view angle). 扩展视角推远 Set default zoom (default view angle). 扩展视角还原为默认大小 Moves viewpoints at a faster rate (Note: Hold down Shift and view key) 快速移动视角(组合键-保持键) Moves camera instead of rotate it. 改旋转视角为移动视角 MISSION EDITOR(任务编辑) Create new mission file 建立新任务文件 Open mission file 打开任务文件 Merge mission file 合并任务文件 Save mission file 保存任务文件 Save As mission file 任务文件另存 Exit Mission Editor and return to Main Menu 退出任务编辑返回主选项界面 Delete selected object 删除所选物体 Classify mission 加密任务 Declassify mission 任务解密 Ver Key(按键) View(查看) Ctrl-H Ctrl-A Ctrl-+ Ctrl-- Flight(任务) Ctrl-B Ctrl-D Ctrl-F Ctrl-R Ctrl-P Ctrl-E Ctrl-L Customize(其它) Ctrl-Shift-F Ctrl-Shift-W Ctrl-Shift-E Ctrl-Shift-O Alt-Z

Action(功能) Hide selected object 隐藏所选物体 Actual size view (Crimean view) 地图全景 Zoom in 视角拉近 Zoom out 视角推远 Display Briefing 显示作战简报 Display Debriefing 显示战报成绩 Start mission 开始任务 Record track file 录相 Play track 重放录相 Video edit 视频编辑 Network Play 联网对战 Failures 飞机故障设定 Weather 天气设定 Encyclopedia 百科全书 Options 选项设定 Remove all objects from Victory Condition of mission or campaign stage Ver Axis(轴) Pitch Roll Rudder Thrust Left thrust Right thrust Action(功能) Control of an airсraft on a pitch 飞机俯仰控制 Control of an airсraft on a roll 飞机侧滚控制 Control of an airсraft on a yaw 舵控制 Control of engines thrust 引擎推力控制 Control of the left engine thrust 左引擎推力控制 Control of the right engine thrust 右引擎推力控制 Ver Horizontal view Vertical view Zoom view Trim pitch Trim roll Trim rudder Radar slew horizontal Radar slew vertical MFD range TDS slew horizontal TDS slew vertical

Control of a view in a horizontal 水平视角控制 Control of a sight in a vertical 垂直视角控制 Control of a zoom view (increase and decreasing of a focal length in the cockpit) 视角缩放控制 Trim on a pitch 俯仰配平 Trim on a roll 侧滚配平 Trim on a yaw 舵配平 Slew of the radar/EOS scan zone in the horizontal for RF fighters and change radar antenna azimuth limit for F-15 雷达/光电扫描区水平移动控制 Slew of the radar/EOS scan zone in the vertical 雷达/光电扫描区垂直移动控制 Change of a range scale on a MFD and HUD 改变MFD/HUD显示范围 Movement a TDS (radar cursor) in the horizontal 雷达锁定框水平移动 Movement a TDS (radar cursor) in the vertical 雷达锁定框垂直移动 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02

因篇幅问题不能全部显示,请点此查看更多更全内容

Copyright © 2019- 69lv.com 版权所有 湘ICP备2023021910号-1

违法及侵权请联系:TEL:199 1889 7713 E-MAIL:2724546146@qq.com

本站由北京市万商天勤律师事务所王兴未律师提供法律服务