中兴交换机密码初始化

先用控制线连好交换机，启动超级终端。

2、对中兴交换机进行加电操作。

3、加电后，在超级终端里会出现如下界面：

Welcome to use ZTE eCarrier!!

Copyright(c) 2004-2006, ZTE Co., Ltd.

System Booting……

CPU: WindBond ARM7TDMI

Version: VxWorks5.5.1

BSP version: 1.2/0

Creation date: Jun 20 2007, 12:52:16

Press any key to stop auto-boot…

7

6

倒计时的时候，按任意键进入BOOT模式。

[ZXR10 Boot]: zte

输入ZTE，系统将加载wbdEnd

Load wbdEnd Begin

W90N740 MAC0: 10MB – Half Duplex

[PASSWORD]:

输入密码 zxr10

Attached TCP/IP interface to wbdEnd0.

Warning: no netmask specified.

Attaching network interface lo0… done.

Attaching to TFFS…

test flash passed perfectly!

Welcome to boot manager!

Type ‘?’ for help

至此已成功加载并进入BOOTMANAGER模式。

[BootManager]:ls

kernel.z 1203948

snmpboots.v3 35

startcfg.txt 667

running.cfg 198723

列出文件，保留kernel.z文件，其他文件删除，即可恢复默认配置。

[BootManager]:del snmpboots.v3

[BootManager]:del startcfg.txt

[BootManager]:del running.cfg

[BootManager]:reboot

Reboot…

重启，重启后，恢复默认配置，账号：admin，密码：zhongxing。

附中兴交换机启动过程：

Welcome to use ZTE eCarrier!!

Copyright(c) 2004-2006, ZTE Co., Ltd.

Copyright(c) 2004-2006, ZTE Co., Ltd.

System Booting……

CPU: WindBond ARM7TDMI

Version: VxWorks5.5.1

BSP version: 1.2/0

Creation date: Jun 20 2007, 12:52:16

Press any key to stop auto-boot…

7

6

5

4

3

2

1

0auto-booting…

boot device : wbdEnd

unit number : 1

processor number : 0

host name : tiger

file name : vxWorks

inet on ethernet (e) : 10.40.89.106

host inet (h) : 10.40.89.78

gateway inet (g) : 10.40.89.78

flags (f) : 0×80

Attaching to TFFS… done.

Loading file :kernel

Uncompressing…

Uncompressed 3360308 bytes Ok.

Loading image… 8670640

Starting at 0×10000…

————————————————————————–

メFunNyぷ(273577082) 14:40:27

Config system end

Welcome !

ZTE Corporation.

All rights reserved.

login: